Permitting Information for Developers, Contractiors, Builders and Plumbers
Technical Specifications and Construction Details
The following Technical Specifications and Construction Details are available by download from this Web site at no charge. If you would prefer these documents on a CD, Metro Water Services will assess a $50 fee, and you will need to visit Metro Water Services in person. To request this CD, contact the MWS Engineering Records Section at 862-4564.
DETAIL DRAWINGS - BACKFLOW AND FIRE SERVICE SCHEMATICS
- Backflow Preventer Box (Updated 3/05) for 6" Through 8" (Domestic and Fire Lines)
- Backflow Preventer Box (Updated 3/05) for 2.5" Through 4" (Domestic and Fire Lines)
- Backflow Preventer Box (Updated 3/05) for 1.5" Through 2" (Domestic and Fire Lines)
- Backflow Preventer Box (Updated 11/07) for 3/4" Through 1" (Domestic and Fire Lines)
- Backflow Preventer Vault (Updated 3/05) for 2.5" Through 8" Double Check Valve Assembly
- Backflow Preventer Inside (Updated 3/05) Building For 2.5" Through 8" Vertical Double Check Valve Assembly
- Backflow Preventer Inside (Updated 3/05) Building For 2.5" Through 8" Horizontal Double Check Valve Assembly
- Backflow Preventer Inside (Updated 3/05) Building for 3/4" Through 2" Horizontal Valve Assembly
- Fire Service Schematic (Updated 3/05) Larger Than 1" Domestic Water Line Only
- Fire Service Schematic (Updated 3/05) 3" Domestic Service with Fire Service
- Fire Service Schematic (Updated 3/05) 4", 6" or 8" Combination Domestic Fire Service
- Fire Service Schematic (Updated 3/05) 6" or 8" Domestic and Fire Services
- Fire Service Schematic (Updated 3/05) 2" and 3" Domestic and Fire Services
- Fire Service Schematic (Updated 3/05) Alternate 4", 6" or 8" Domestic and Fire Service
- Fire Service Schematic (Updated 3/05) 8" Combination Domestic and Fire Line
- Fire Service Schematic (Updated 3/05) Alternate to Combination Domestic and Fire Loop
- Fire Service Schematic (Updated 3/05) Irrigation System with Fire Service and Domestic Service
DETAIL DRAWINGS - METERS
- Meter (Updated 7/04) Meter Installation for 5/8" or 3/4" Meters
- Meter (Updated 3/05) Meter Installation for 1" Meters
- Meter (Updated 3/05) Meter Installation for 1.5 or 2" Meters
- Meter (Updated 3/05) Installation for 3" Meter on 3" Service
- Meter (Updated 3/05) Meter Box for 4" Meter for 4" Service
- Meter (Updated 3/05) Meter Box for 6" Meter for 6" Service
- Meter (Updated 3/05) 3-inch Battery Meter Installation on 4-inch Service
- Meter (Updated 3/05) Sensus Corporation, 6" and 8" Fire Meter Installation with 2" Turbo By-Pass
- Meter (Updated 3/05) Schlumberger, 6" and 8" Fire Meter Installation
- Meter (Updated 3/05) Small Meter Frame and Cover
- Meter (Updated 3/05) Large Meter Frame and Cover
DETAIL DRAWINGS - OTHER
- Construction Signs (Updated 11/2007) AutoCAD drawings
- Sewer (Updated 4/2004) AutoCAD drawings
- Water (Updated 4/2004) AutoCAD drawings
- Pressure Reduced Vault (Updated 4/2004) Pressure Reduced Vault
- Typical Service (Updated 4/2004) Typical Service
DIVISION SPECIFICATIONS
This document gives a detailed description of the contents of each of the following divisions. It is recommended that you download this document first as a method of determining which specifications or contents you need. Then you can proceed with downloading only those divisions that you require. The specifications and drawings are to be used as an aid in the design of projects and are in no way intended to replace a licensed Engineer's drawings and specifications.
(All divisions last updated 4/04)
- Division 1
- Division 2
- Division 3
- Division 4
- Division 5
- Division 6
- Division 7
- Division 8
- Division 9
- Division 10
- Division 11
- Division 13
- Division 14
- Division 15
- Division 16
- Division
17
Questions which are not addressed through this web site, please email Sonia Harvat.